BUILT PROJECTS

ICD/ITKE Research Pavilion 13/14

ICD/ITKE Research Pavilion 13/14

ICD/ITKE Research Pavilion 13/14

ICD/ITKE Research Pavilion 13/14

The Institute for Computational Design (ICD) and the Institute of Building Structures and Structural Design (ITKE) of the University of Stuttgart have constructed another bionic research pavilion. The project is part of a successful series of research pavilions which showcase the potential of novel design, simulation and fabrication processes in architecture. The project was planned and constructed within one and a half years by students and researchers within a multi-disciplinary team of architects, engineers and biologists. The focus of the project is a parallel bottom-up design strategy for the biomimetic investigation of natural fiber composite shells and the development of novel robotic fabrication methods for fiber reinforced polymer structures. The aim was the development of a winding technique for modular, double layered fiber composite structures, which reduces the required formwork to a minimum while maintaining a large degree of geometric freedom. Therefore, functional principles of natural lightweight structures were analyzed and abstracted in cooperation with the University of Tübingen and the Karlsruhe Institute of Technology. Through the development of a custom robotic fabrication method, these principles were transferred into a modular prototype pavilion. PROJECT-TEAM Institute for Computational Design - Prof. Achim Menges Institute of Building Structures and Structural Design - Prof. Dr. Jan Knippers RESEARCH DEVELOPMENT AND PROJECT MANAGEMENT Moritz Dörstelmann, Vassilios Kirtzakis, Stefana Parascho, Marshall Prado, Tobias Schwinn CONCEPT DEVELOPMENT Leyla Yunis SYSTEM DEVELOPMENT AND REALIZATION WiSe 2012 – SoSe2013: Desislava Angelova, Hans-Christian Bäcker, Maximilian Fichter, Eugen Grass, Michael Herrick, Nam Hoang, Alejandro Jaramillo, Norbert Jundt, Taichi Kuma, Ondrej Kyjánek, Sophia Leistner, Luca Menghini, Claire Milnes, Martin Nautrup, Gergana Rusenova, Petar Trassiev , Sascha Vallon, Shiyu Wie WiSe 2013:Hassan Abbasi, Yassmin Al-Khasawneh, Desislava Angelova, Yuliya Baranovskaya, Marta Besalu, Giulio Brugnaro, Elena Chiridnik, Eva Espuny, Matthias Helmreich, Julian Höll, Shim Karmin, Georgi Kazlachev, Sebastian Kröner, VangelKukov, David Leon, Stephen Maher, Amanda Moore, Paul Poinet, Roland Sandoval, Emily Scoones, Djordje Stanojevic, Andrei Stoiculescu, Kenryo Takahashi, Maria Yablonina supported by Michael Preisack IN COOPERATION WITH: Institute of Evolution and Ecology, Evolutionary Biology of Invertebrates, University of Tübingen - Prof. Oliver Betz Department of Geosciences, Paleontology of Invertebratesand Paleoclimatology Universität Tübingen - Prof. James H. Nebelsick University of Tübingen, Module: Bionics of animal constructions, WiSe 2012: Gerald Buck, Michael Münster, Valentin Grau, Anne Buhl, Markus Maisch, Matthias Loose, Irene Viola Baumann, Carina Meiser ANKA / Institute for Photon Science and Synchrotron Radiation Karlsruhe Institute of Technology (KIT) – Dr. Thomas van de Kamp, Tomy dos Santos Rolo, Prof. Dr. Tilo Baumbach Institute for Machine Tools University of Stuttgart – Dr.-Ing. Thomas Stehle, Rolf Bauer, Michael Reichersdörfer Institute of Textile Technology and Process Engineering ITV Denkendorf - Dr. Markus Milwich FUNDING Kompetenznetz Biomimetik KUKA Roboter GmbH SGL Group Sika AG AFBW For more infos visit: http://www.itke.uni-stuttgart.de/entwicklung.php?id=67

ICD/ITKE Research Pavilion 13/14> 45 cm diameter component

ICD/ITKE Research Pavilion 13/14> 45 cm diameter component

ICD/ITKE Research Pavilion 13/14> 250 cm diameter component

ICD/ITKE Research Pavilion 13/14> 250 cm diameter component

FRAC.png
ICD HYGROSKIN PAVILION > Open hygroscopic elements

ICD HYGROSKIN PAVILION > Open hygroscopic elements

ICD HYGROSKIN PAVILION > Closed hygroscopic elements

ICD HYGROSKIN PAVILION > Closed hygroscopic elements

ELYTRA PAVILION > Exhibition Model 1:20

ELYTRA PAVILION > Exhibition Model 1:20

ELYTRA PAVILION > Exhibition Model 1:20

ELYTRA PAVILION > Exhibition Model 1:20

PARAMETRIC SYNTAX > Elytra Pavilion

PARAMETRIC SYNTAX > Elytra Pavilion

Elytra Filament Pavilion - V&A Museum London For full project infomation see: http://icd.uni-stuttgart.de/?p=16443 Achim Menges with Moritz Dörstelmann ICD – Institute for Computational Design, University of Stuttgart Achim Menges Architect, Frankfurt Team also includes: Marshall Prado (fabrication development), Aikaterini Papadimitriou, Niccolo Dambrosio, Roberto Naboni, with support by Dylan Wood, Daniel Reist Jan Knippers ITKE – Institute of Building Structures and Structural Design, University of Stuttgart Knippers Helbig Advanced Engineering, Stuttgart, New York Team also includes: Valentin Koslowski & James Solly (structure development), Thiemo Fildhuth (structural sensors) Thomas Auer Transsolar Climate Engineering, Stuttgart Building Technology and Climate Responsive Design, TU München Team also includes: Elmira Reisi, Boris Plotnikov With the support of: Michael Preisack, Christian Arias, Pedro Giachini, Andre Kauffman, Thu Nguyen, Nikolaos Xenos, Giulio Brugnaro, Alberto Lago, Yuliya Baranovskaya, Belen Torres, IFB University of Stuttgart (Prof. P. Middendorf) Commission: Victoria & Albert Museum, London 2016

HAND WOUND PIECES > ICD/ITKE Research Pavilion 13/14 - Exhibition Model 1:20

HAND WOUND PIECES > ICD/ITKE Research Pavilion 13/14 - Exhibition Model 1:20

ICD/ITKE Research Pavilion 13/14 > Exhibition Model 1:20

ICD/ITKE Research Pavilion 13/14 > Exhibition Model 1:20

BIOMAT PAVILION > Exhibition Model 1:15

BIOMAT PAVILION > Exhibition Model 1:15

BENT WOOD > BioMat Pavilion - Exhibition Model 1:15

BENT WOOD > BioMat Pavilion - Exhibition Model 1:15

COMPONENT EXTRACTION > BioMat Pavilion

COMPONENT EXTRACTION > BioMat Pavilion

ICD/ITKE Research Pavilion 15/16 > Exhibition Model 1:15

ICD/ITKE Research Pavilion 15/16 > Exhibition Model 1:15

ICD/ITKE Landesgartenschau Exhibition Hall > Exhibition Model 1:15

ICD/ITKE Landesgartenschau Exhibition Hall > Exhibition Model 1:15

ICD/ITKE Research Pavilion 15/16 > Unfolding components

ICD/ITKE Research Pavilion 15/16 > Unfolding components

SEWN WOOD > ICD/ITKE Research Pavilion P 15/16 - Exhibition Model 1:15

SEWN WOOD > ICD/ITKE Research Pavilion P 15/16 - Exhibition Model 1:15

INTERIOR FINGER JOINT ASSEMBLY > ICD/ITKE Landesgartenschau Exhibition Hall - Exhibition Model 1:15

INTERIOR FINGER JOINT ASSEMBLY > ICD/ITKE Landesgartenschau Exhibition Hall - Exhibition Model 1:15

Built projects

The Landesgartenschau Exhibition Hall is an architectural prototype building and a showcase for the current developments in computational design and robotic fabrication for lightweight timber construction. Funded by the European Union and the state of Baden-Württemberg, the building is the first to have its primary structure entirely made of robotically prefabricated beech plywood plates. This newly developed timber plate construction is made possible through integrative computational design, simulation, fabrication and surveying methods resulting not only in a highly performative and resource efficient plate shell structure but also in innovative architecture. PROJECT TEAM ICD Institute for Computational Design: Prof. A. Menges (PI), Tobias Schwinn, Oliver David Krieg ITKE Institute of Building Structures and Structural Design: Prof. J. Knippers, Jian-Min Li IIGS Institute of Engineering Geodesy: Prof. Volker Schwieger, Annette Schmitt Müllerblaustein Holzbau GmbH: Reinhold Müller, Benjamin Eisele KUKA Roboter GmbH: Alois Buchstab, Frank Zimmermann Landesbetrieb Forst Baden-Württemberg: Sebastian Schreiber, Frauke Brieger Landesgartenschau Schwäbisch Gmünd 2014 GmbH: Karl-Eugen Ebertshäuser, Sabine Rieger PROJECT FUNDING EFRE European Union Clusterinitiative Forst und Holz, Baden Württemberg Landesgartenschau Schwäbisch Gmünd 2014 GmbH Müllerblaustein Holzbau GmbH KUKA Roboter GmbH Landesbetrieb Forst Baden-Württemberg PROJECT SUPPORT Autodesk GmbH Adler Deutschland GmbH Carlisle Construction Materials GmbH Fagus Stiftung Gutex H. Henselmann GmbH & Co. KG Hess & Co. AG MPA – Materialprüfanstalt, Universität Stuttgart Leitz GmbH & Co. KG Spax International GmbH & Co. KG Video by Cinq Visuals Photograph of sand dollar (Gerber & Nebelsick, University of Tübingen) Microscopic image of sand dollar (Nebelsick & Grun, University of Tübingen)

ICD/ITKE Landesgartenschau Exhibition Hall > Exhibition Model 1:15

ICD/ITKE Landesgartenschau Exhibition Hall > Exhibition Model 1:15

BUGA WOOD PAVILION > Exhibition Model 1:20

BUGA WOOD PAVILION > Exhibition Model 1:20

BUGA WOOD PAVILION > Exhibition Model 1:20

BUGA WOOD PAVILION > Exhibition Model 1:20

BUGA WOOD PAVILION > Exhibition Model 1:20

BUGA WOOD PAVILION > Exhibition Model 1:20